Arkansas Land Disturbance Permit Search: Sitework Records & Requirements

Arkansas permit records · Sitework and construction

Arkansas Land Disturbance Permits: Find Records and Check Requirements

Planning site clearing, grading, excavation, filling or other earthwork in Arkansas? Start by checking the property’s local permitting authority and the Arkansas Division of Environmental Quality’s construction stormwater requirements. The permit you need depends on the location, total disturbed acreage, drainage conditions and the nature of the work.

Quick answer: Arkansas does not have one statewide database containing every local grading or land disturbance permit. State construction stormwater records are available through DEQ systems, while separate land-alteration, grading and drainage approvals may be maintained by city or county offices. For construction stormwater, the important thresholds generally begin at one acre of disturbance, including qualifying smaller portions of a larger common development plan.

1 acreGeneral starting threshold for construction stormwater requirements, including applicable common-plan projects.
5 acresThreshold for large construction site coverage and additional state application requirements.
ARR150000Arkansas Construction Stormwater General Permit identifier.

What Counts as Land Disturbance in Arkansas?

Land disturbance generally involves activities that alter the ground surface or expose soil. Typical examples include clearing vegetation, grading, excavating, trenching, filling, stockpiling soil and preparing land for roads, buildings or utility installations.

The phrase “land disturbance permit” can describe several different regulatory approvals. Arkansas’s statewide construction stormwater system primarily addresses stormwater discharges associated with construction activity, while local governments may regulate physical site alteration through separate ordinances.

Common sitework activities

  • Site clearing: Removing vegetation and exposing soil before development.
  • Grading: Changing ground elevations, slopes or drainage patterns.
  • Excavation: Digging for foundations, roads, utilities or other structures.
  • Filling: Placing material to raise or reshape ground elevations.
  • Road and parking construction: Preparing pavement areas, access routes and associated drainage.
  • Utility work: Trenching and related surface disturbance.
  • Subdivision development: Preparing multiple lots and shared infrastructure under a common development plan.

Not every activity requires the same approval. Agricultural activities, routine maintenance, small residential improvements and other work may be subject to different rules or exclusions. Check the actual permit language and applicable local ordinance before relying on an exemption.

Arkansas Construction Stormwater Acreage Requirements

Arkansas uses Construction Stormwater General Permit ARR150000 to regulate qualifying construction-related stormwater discharges. The total land disturbance and whether the work belongs to a larger common plan of development or sale are central to determining the applicable category.

Construction stormwater categories under Arkansas ARR150000
DisturbanceGeneral categoryImportant requirement
Less than 1 acreUsually below the standalone acreage thresholdCoverage may still apply if part of a larger common development plan or specifically designated by DEQ. Local rules also apply.
1 to less than 5 acresSmall construction siteAutomatic coverage under applicable permit conditions, with required documents and controls maintained at the site.
5 acres or moreLarge construction siteNOI submission, required stormwater documentation and coverage requirements before applicable construction activity begins.

As of October 18, 2026, the current ARR150000 permit is scheduled to expire October 31, 2026. DEQ has published a renewal effective November 1, 2026. Projects extending across that transition should check renewal and recertification requirements rather than assuming the current permit terms remain unchanged.

Common-plan rule: A single lot disturbing less than one acre may still fall within regulated construction activity if it is part of a larger common plan of development or sale whose total disturbance reaches the applicable threshold. Assess the overall development, not just the acreage disturbed on one lot during one phase.

Small construction sites

DEQ identifies automatic coverage for qualifying construction sites disturbing at least one acre but less than five acres. Its published instructions direct operators to post the applicable Notice of Coverage and maintain required SWPPP and inspection documentation at the site rather than sending those small-site documents to DEQ.

Automatic coverage is not an exemption from pollution prevention requirements. The operator must comply with the applicable construction stormwater conditions and implement appropriate erosion and sediment controls.

Large construction sites

Construction activity disturbing five acres or more generally falls within the large-site category. Operators must complete the applicable state filing process and obtain the required coverage before regulated work begins. DEQ lists ARR150000 construction stormwater forms in the SEEK system.

The state stormwater page lists a $200 annual fee for the large-site category under the permit effective through October 31, 2026. Application charges, renewal provisions and payment procedures should be confirmed in the official system for the permit term covering the project.

Review the current and renewal construction stormwater permits and forms on DEQ’s official page.

Local Arkansas Grading and Land Alteration Permits

State construction stormwater coverage does not replace a city or county’s authority over grading plans, land development, drainage or floodplain activity. Local permit thresholds may be based on site acreage, soil movement, land-use classification, approved development plans or other factors.

Bentonville grading permits

The City of Bentonville provides a useful example of a local process. Its published grading permit requirements cover grading, filling, excavation or land alteration on sites one acre or larger during construction when the work is not part of an approved preliminary plat or large-scale development.

Bentonville directs applicants to its online eTrakit system. The city’s process includes application, review and approval, routine inspections and final closeout. The city also publishes grading and limited grading checklists.

For approved projects, Bentonville states that the grading permit cover page must be posted near the street right-of-way where it is visible from the street.

Bentonville official grading permit requirements and application information ↗

Fayetteville grading and erosion control

Fayetteville regulates physical alteration of land and stormwater management through local development requirements. Depending on the project, a grading permit may be handled alongside stormwater management, drainage and erosion control approval.

Check the city’s current engineering and development procedures for the specific property, including any applicable residential-lot exemptions, subdivision approvals and drainage requirements.

A state stormwater permit should not be treated as authorization to disregard Fayetteville’s local grading or drainage rules.

Other Arkansas municipalities and unincorporated areas

Requirements outside Bentonville and Fayetteville can differ substantially. In Little Rock, Rogers, Springdale, Conway, Fort Smith and other communities, check the responsible local development or engineering authority rather than applying another city’s checklist.

For property outside incorporated city limits, start with the relevant county offices and ask which authority handles grading, subdivision, floodplain and stormwater review. Some responsibilities may fall to a separate drainage district, municipal utility or other local authority.

Three questions to ask the local permit office

  1. Does this parcel require a grading, land alteration, excavation or site development permit for the proposed work?
  2. What plans, engineering certifications, erosion controls and application documents must be submitted?
  3. Does local approval depend on separate state stormwater coverage or another environmental authorization?

Ask for the applicable ordinance or published checklist. This helps distinguish a required approval from an informal recommendation.

Plans and Documents Commonly Needed for Land Disturbance Approval

Documentation depends on the jurisdiction and project category. A small construction site operating under automatic stormwater coverage will not necessarily submit the same paperwork as a large development requiring state coverage and municipal grading review.

Site and engineering documents

  • Property address, parcel identification or legal description.
  • Owner, developer and responsible operator information.
  • Site location plan and proposed development boundaries.
  • Total project acreage and estimated disturbed acreage.
  • Existing and proposed grading or contour information.
  • Drainage features, proposed flow patterns and discharge locations.
  • Construction entrance and soil stockpile locations.
  • Erosion and sediment control details.
  • Construction phasing and stabilization plans.
  • Applicable engineering drawings and supporting calculations.

Stormwater Pollution Prevention Plan (SWPPP)

A SWPPP describes how an operator will control stormwater pollution during construction. It should reflect actual site conditions and construction operations rather than simply repeat a generic checklist.

Relevant information commonly includes the nature of construction activity, soil disturbance areas, drainage routes, erosion and sediment controls, inspection procedures, corrective actions and stabilization practices.

The applicable ARR150000 permit specifies the detailed obligations. DEQ provides SWPPP and inspection resources through its general stormwater permits page.

State permit terminology

Documents and identifiers encountered in Arkansas construction stormwater records
TermMeaningWhy it matters
NOINotice of IntentA filing requesting coverage under a general permit when required.
NOCNotice of CoverageEvidence of applicable general permit coverage, subject to its conditions.
SWPPPStormwater Pollution Prevention PlanDocuments the controls and practices used to limit construction stormwater pollution.
NOTNotice of TerminationUsed when an operator seeks to end coverage after satisfying applicable termination criteria.
AFINDEQ Facility Identification NumberHelps locate a facility across environmental permit records.

How to Prepare and Submit an Arkansas Sitework Permit Application

The following workflow combines local approval planning with state stormwater screening. It is not a substitute for the specific application instructions issued by the authority reviewing the project.

  1. Establish the exact site and jurisdiction.

    Identify the parcel, city limits, county and responsible planning or engineering department. Confirm whether the land falls within a subdivision, special drainage area or regulated floodplain.

  2. Define the entire disturbance area.

    Calculate the total soil disturbance across the proposed work and connected phases. Include relevant common-plan activity when assessing state stormwater applicability.

  3. Check state stormwater coverage.

    Read the applicable ARR150000 requirements and determine whether the project qualifies for small-site automatic coverage or needs the large-site application process.

  4. Prepare required plans.

    Complete grading, erosion control, drainage, site and stormwater documents appropriate to the project. Check whether professional engineering design or certification is required.

  5. Apply through the responsible authority.

    Submit the local grading application through the municipality’s designated portal or office. If a state NOI is required, use the current DEQ-designated process, including SEEK for ARR150000 submissions.

  6. Resolve review comments.

    Address requests for corrected drainage calculations, incomplete documents, site revisions or additional approvals. A submitted application is not the same as an approved permit.

  7. Confirm authorization before work.

    Verify the relevant local approval, state coverage and any required preconstruction conditions. Keep the applicable plans and notices available as required.

  8. Manage inspections and closeout.

    Maintain erosion and sediment controls, document inspections, correct deficiencies and complete required stabilization and termination procedures.

Application system distinction: Arkansas DEQ lists construction stormwater forms in SEEK. Older DEQ ePortal resources remain available for other submissions and historical guidance. Select the system identified on the current official permit page for the particular form you need.

How to Interpret Arkansas Sitework and Permit Records

Finding a permit number is only the beginning of a meaningful records review. The next task is to establish which parcel and activities the permit covers, who holds responsibility and whether the approval remains applicable.

Information worth checking

  • Permit number: Helps identify the correct record and related documents.
  • Operator or permittee: Identifies the party associated with state coverage or local approval.
  • Site location: Confirms whether the permit matches the correct property or development.
  • Issuance or coverage date: Indicates when applicable authorization was granted.
  • Approved scope: Describes activities, site boundaries or plans covered by the record.
  • Status: May show active, terminated, expired or another administrative designation.
  • Modifications: May reveal changes in acreage, ownership, operations or plans.
  • Inspections: May identify compliance reviews and corrective actions where records are available.

What a permit record does not necessarily establish

A construction stormwater permit does not prove that a proposed building is permitted, that grading is structurally suitable, that a parcel is outside a flood hazard area or that all local approvals have been granted.

Similarly, a grading permit does not automatically authorize wetland filling, work within a waterway or activities requiring separate federal or state environmental approval.

Searching older records

Historical projects can be more difficult to trace when the developer’s name has changed, a property was subdivided or a permit migrated between records systems.

Search using earlier owner or project names, approximate construction dates, subdivision references and known permit identifiers. If an electronic record is missing, request the relevant file or record history from the administering agency.

For DEQ records marked “In SEEK,” check the newer system rather than relying entirely on older PDS status fields.

Sitework Compliance: Erosion, Sediment, Drainage and Stabilization

Construction exposes soils that can be carried into drainage systems, streams and neighboring properties during rainfall. Stormwater permit conditions and local engineering standards are intended to reduce those impacts.

Erosion and sediment control

Appropriate controls depend on the site’s slope, soil, drainage patterns, construction sequence and discharge locations. Examples may include stabilized entrances, sediment barriers, inlet protection, temporary seeding, slope protection and sediment containment practices.

The responsible operator should implement the controls identified in the applicable SWPPP and permit, inspect them as required and repair or replace measures that are not working.

Stormwater drainage planning

Grading changes where water flows. A proposed site may need drainage calculations, detention facilities, conveyance improvements or other controls before local approval.

Do not assume that keeping work outside a stream eliminates drainage obligations. Concentrated runoff, nearby storm drains and downstream receiving waters can still be important.

Stabilization and permit closeout

Ending earthwork does not automatically end stormwater responsibilities. Required stabilization measures may need to be completed before permit termination, and local governments may require inspections or documentation before closing a grading approval.

For large-site state coverage, review the applicable Notice of Termination instructions in SEEK and the governing permit. Local site-final requirements must be handled separately.

Other permits that may be involved

Depending on site conditions, a project may also require floodplain development approval, authorization involving wetlands or waters of the United States, utility or right-of-way permits, or separate discharge approvals.

Arkansas DEQ also administers Short Term Activity Authorizations for certain qualifying activities affecting water quality, including selected dredging, crossing, utility and bank stabilization work. An STAA does not replace construction stormwater requirements.

Review Arkansas DEQ Short Term Activity Authorization guidance ↗

Common Permit Search and Application Problems

No matching permit appears in the state database

First check whether the activity required a state filing. Some qualifying small construction sites use automatic coverage without submitting an individual NOI. Also consider whether the project is recorded under another operator, subdivision or facility name.

If the permit may have moved to SEEK, use that system or contact DEQ for clarification.

The local office has no grading permit under the address

Ask whether the work was covered by a subdivision, preliminary plat, large-scale development approval or another permit category. A project may be indexed by legal parcel description or development name rather than an assigned street number.

The application is incomplete

Compare the submission against the local checklist. Missing drainage details, grading plans, authorization signatures or erosion-control information can delay review. Submit a coordinated correction rather than disconnected revisions that conflict with earlier drawings.

A contractor says state coverage is sufficient

Confirm local requirements directly with the relevant engineering or planning authority. State stormwater coverage and local land-development approval serve different regulatory purposes.

Work appears to exceed approved grading limits

Compare the current sitework with approved plans and contact the issuing authority if discrepancies appear. Additional disturbed acreage or changed drainage conditions may require an updated plan or permit modification.

A permit is listed but its status is unclear

Record the permit number, facility name and date shown in the system. Ask the administering agency to confirm the latest status and whether amendments, termination documents or other updates exist.

Official Arkansas Land Disturbance and Sitework Resources

These government resources are useful starting points for permit searches, state stormwater guidance and local grading requirements.

DEQ Permit Data System

Search environmental facilities and permit summaries by identifier, name, county, city and other available criteria.

Search PDS records ↗

Arkansas SEEK

Access the state’s electronic environmental permitting platform, including construction stormwater submissions.

Open SEEK ↗

DEQ General Stormwater Permits

Find ARR150000 requirements, renewal information, application guidance and SWPPP resources.

View construction permit information ↗

DEQ Final Water Permits

Search available final water permit records by permit number, facility name, county and date range.

Search final permits ↗

Bentonville Grading Permits

Review a municipal grading permit process, required documents, inspections and online filing information.

View Bentonville requirements ↗

Arkansas DEQ Databases

Find additional environmental records, inspection information and state mapping resources.

Explore DEQ databases ↗

State environmental permitting office

Arkansas Division of Environmental Quality
Water Discharge Permits Section
5301 Northshore Drive
North Little Rock, AR 72118-5317

General stormwater inquiries: 501-683-0962.

This state office handles environmental permitting functions. It should not be assumed to issue every municipality’s grading or site development permit.

Location and office map

The following map identifies the DEQ office in North Little Rock. It is a statewide environmental permitting contact location, not necessarily the local office responsible for approving grading work on your property.

Open the DEQ office location in Google Maps ↗

Before visiting, confirm whether the specific permit service is handled in person, through SEEK or by another designated submission channel.

Practical Arkansas Sitework Examples

Example 1: A two-acre commercial pad site

Suppose a contractor plans to clear and grade two acres for a commercial building. The disturbance falls within the typical small construction stormwater category under ARR150000, assuming no other conditions change the applicable coverage.

The operator should verify automatic coverage conditions, prepare and maintain required stormwater documents and check whether the city requires an independent grading or development approval before construction.

Example 2: A six-acre subdivision improvement

A proposed development disturbing six acres generally falls within the large-site construction stormwater category. The operator should follow the applicable NOI and coverage process and coordinate municipal infrastructure, plat, grading and drainage approvals.

Beginning with a smaller first construction phase does not necessarily remove the overall project from the large-site category.

Example 3: A half-acre lot within a larger development

A builder disturbing half an acre within a subdivision should not assume that the project is automatically outside stormwater regulation. The common development plan may trigger permit responsibilities, and local rules may contain additional conditions.

The builder should verify how the larger project’s stormwater obligations apply to the individual lot and who is responsible for maintaining controls.

Example 4: Excavation near a drainage feature

A small excavation project can still raise questions about drainage, flooding, bank disturbance or impacts to regulated waters. Even when acreage falls below the usual state construction stormwater threshold, other approval requirements may remain.

Identify the affected drainage feature and request a jurisdiction-specific determination from the appropriate authority before work begins.

Frequently Asked Questions About Arkansas Land Disturbance Permits

1. How do I search for a land disturbance permit in Arkansas?

Use the Arkansas DEQ Permit Data System for state environmental permit records and check SEEK for newer or migrated records. Search the city or county permit office separately for grading, excavation, land-alteration and local development approvals.

2. Is a land disturbance permit required for every Arkansas construction project?

No. Requirements depend on the activity, disturbed acreage, common development plan, local jurisdiction and environmental conditions. A project may need state stormwater coverage, local grading approval, both or other authorizations.

3. What is the one-acre rule for Arkansas construction stormwater?

Construction activity disturbing one acre or more generally falls within state construction stormwater regulation. Smaller work can also be covered when it is part of a larger common plan of development or sale meeting the threshold, or when otherwise designated by DEQ.

4. Does a project disturbing two acres need to submit a state NOI?

Qualifying sites disturbing at least one acre but less than five acres generally receive automatic small-site coverage under ARR150000. DEQ directs operators to maintain and post the applicable documents at the site rather than submitting them as a small-site NOI. Compliance with permit conditions remains necessary.

5. What happens when a project disturbs five acres or more?

The project generally falls within the large construction site category. The operator must follow the applicable ARR150000 application and coverage procedures, including required documentation and authorization before starting regulated activity.

6. Are grading permits and construction stormwater permits the same?

No. A grading permit may authorize physical changes to the land under local development rules. Construction stormwater coverage regulates qualifying stormwater discharges and pollution prevention. One does not automatically replace the other.

7. Can I look up Arkansas grading permits by property address?

Some municipal systems allow address-based searches. Others use permit numbers, parcel identifiers, subdivision names or applicant information. DEQ’s state permit database uses facility and permit information, which may not correspond directly to a street address.

8. What does SWPPP mean on an Arkansas permit?

SWPPP stands for Stormwater Pollution Prevention Plan. It documents construction stormwater management practices, relevant erosion and sediment controls, site conditions and compliance procedures required under the applicable permit.

9. Can site clearing begin before the permit is approved?

Do not start regulated work before satisfying the applicable permit and authorization requirements. For large construction stormwater sites, required coverage must be established before the regulated activity begins. Local grading approvals may impose separate commencement conditions.

10. How can I check whether an Arkansas land disturbance permit is still active?

Search the relevant state or municipal records system using the permit or facility identifier. Check for amendments, termination records and status information. For state permits migrated to SEEK, confirm the current status there or with DEQ rather than relying only on legacy PDS information.

What to Do Before Starting Land Disturbance

Identify the parcel and responsible local authority, calculate the entire disturbance area, determine whether common-plan rules apply and review the current ARR150000 construction stormwater requirements. Then compare those findings against the local grading, drainage and development approval process.

For an existing project, search both state and local records, confirm that the permit covers the correct site and activity, and review any changes or closeout documents. When a record is missing or unclear, a direct request to the issuing agency is more reliable than treating an empty online search as proof that no permit exists.

County Permit Smart Tools

Find the Right Permit, Prepare Documents, Plan Inspections & Avoid Permit Mistakes

Use these quick permit tools to understand which permit may apply, how to search permit records, what documents to prepare, which inspections may happen, and which local department usually handles your issue.

Built for permit users Helpful for building permits, remodels, roofing, electrical, plumbing, fences, pools, decks, zoning, and inspection planning.
Educational guidance only Permit rules, fees, forms, inspections, and deadlines must be verified with the official county or city office.
Mobile friendly Designed for phones, tablets, and desktop screens without external scripts, jQuery, or extra plugins.

Permit Type Finder

Select your project type to see the likely permit category, common documents, possible inspections, and the office you may need to contact.

Commercial and rental projects may need extra review, contractor details, or inspections.
Result copied.

Permit Search Method Helper

Search portals work differently by county or city. Choose what information you have and this tool will suggest the best way to search permit records.

Use this to create simple search variations if needed.
Tips copied.

Permit Application Readiness Checklist

Use this checklist before applying online or visiting the building department. Missing documents are one of the most common reasons permit applications are delayed.

Tip: Save PDFs, drawings, contractor licence proof, emails, and receipts in one folder before applying. It makes resubmission and inspection scheduling easier.

Permit Inspection Stage Planner

Select your project type to see common inspection stages and what to prepare before requesting an inspection.

Plan copied.

Correct Department Finder

Select the issue and this tool will show the department that usually handles it. Local names may vary by county or city.

Select an option above to see the usual department.

Unpermitted Work Risk Checker

If work was already done without a permit, use this tool to understand the risk level and next steps before ignoring the issue.

Result copied.